About  Course  Disciplines  Faculty  Research  Chinese 
Position: index > Faculty > professor > Content

Ying Liu


Ying Liu (Doctoral Supervisor)

Tel: +86-28-85405536

Email: liuying5536@163.com

Research Interests: Functional Materials Based on Rare Earth, Vanadium and Titanium Resources, Metallic Porous Materials, Nano-materials

Publication List:

1) Ying Liu*, Binghong Li, Jun Li, et al. Effect of titanium on the ductilization of Fe-B alloys with high boron content[J]. Materials Letters,2010,64(11) 1299–1301

2) Ying Liu*, Yongzhong Jin, Haijun Yu, et al. Ultrafine (Ti,M)(C,N)-based cermets with optimal mechanical properties, [J].International Journal of Refractory Metals & Hard Materials,2011,29(1):104-107.

3) Ma, Shiqing; Ye, Jinwen; Liu, Ying*; et al, Synthesis, Characterization, and Consolidation of Cr2(C,N) Solid Solution Powders, [J]Journal of the American Ceramic Society,2016,99(6):1943-1950

4) Ma, Shiqing; Ye, Jinwen; Liu, Ying*; et al, Synthesis of (V,Cr)(C,N) nanopowders via carbothermal reduction nitridation method: Influence factors and morphology evolution, International, [J] Journal of Refractory Metals and Hard Materials, 2016; 5851-56

5) Wang, LinzhiLiu, Ying*; Chang, Sen, Fabrication of Spherical AlSi10Mg Powders by Radio Frequency Plasma Spheroidization, [J] Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science2016,47A (5):2444-2453

6) Kong, QQ; Liu, Y*; Lian, LX; et al, Fabrication, characterization and electrochemical properties of porous hollow palladium spheres, [J] Journal of Alloys and Compounds, 2015 (632) 701–706

7) Zheng Qing, Li Jun, Liu Ying*, et al, Coercivity enhancement and microstructural characterization of Sm2Fe17Nx alloys prepared by mechanochemical treatment[J]Material Science and Engineering B,2014,179C.60-65

8) Gang Zhu , Ying Liu*, Jinwen Ye, Early high-temperature oxidation behavior of Ti(C,N)-based cermets with multi-component AlCoCrFeNi high-entropy alloy binder, [J]International Journal of Refractory Metals and Hard Materials, 2014, 44, 35–41

9) Yu, Haijun; Ye, Jinwen; Liu, Ying*, et al, Synthesis of (Ti, W, Mo, V)(C, N) powders by carbothermal reduction-nitridation with NH4HCO3 addition, [J]International Journal of Refractory Metals and Hard Materials, 2014, 44, 84–87

10) Qing Zheng, Jun Li, Ying Liu*, et al, Highly oriented NdFeCoB nanocrystalline magnets from partially disproportionated compacts by reactive deformation under low pressure, [J]Journal of Applied Physics, 2014 (115):173511

11) Li, Jialin; Li, Jun; Liu, Ying*, et al, Reactive Synthesis of FeWB Powders and Preparation of Bulk Materials, [J]International Journal of Refractory Metals and Hard Materials, 2014, 46, 80–83

12) Li Jun, Liu Ying*, Gao Jing, et al, Microstructure and magnetic properties of bulk Nd2Fe14B/α-Fe nano-composite prepared by chemical vapor deposition [J] Journal of Magnetism and Magnetic Materials,2013,328:1-6

13) Zhang R, Liu Y*, Ye JW, et al. Effect of Nb substitution on the temperature characteristics and microstructures of rapid-quenched NdFeB alloy[J]. Journal of Alloys and Compounds, 2007,427(1-2):78-81

14) Li J, Liu Y*, Gao SJ, et al. Effect of process on the magnetic properties of bonded NdFeB magnet[J] .Journal of Magnetism and Magnetic Materials, 2006 ,299 (1): 195-204

15) Binghong Li, Ying Liu*, Jun Li, et al. Effect of tungsten addition on the microstructure and tensile properties of in situ TiB2/Fe composite produced by vacuum induction melting[J]. Materials & Design,2010,31(2):877-883

16)Xiang DP, Liu Y*, Gao SJ, et al. Evolution of phase and microstructure during carbothermal reduction–nitridation synthesis of Ti(C,N) [J]. Material Characterization,2008,59(3):241-244

17)Zhiwei Zhao, Ying Liu*, HongCao, et al Synthesis of VN nanopowders by thermal nitridation of the precursor and their characterization, Journal of Alloys and Compounds, 2008, 464(1-2):75-78

18)Meng Li,Ying Liu ,Guangda Lu, J et al. Preparation and dynamic deuterium gas loading of highly porous palladium bulks[J].International Journal of Hydrogen Energy, 2007,32(18): 5033-5038

19)Xiang DP, Liu Y*, Zhao ZW, et al. Reaction sequences and influence factors during preparation of Ti(C,N) powders[J].Journal of Alloys and Compounds,2007,429,(1-2):264-269.

20) Zhao ZW, Liu Y*, Cao H, et al A novel method to synthesize vanadium carbide (V8C7) nanopowders by thermal processing NH4VO3, C6H12O6 and urea[J]. Journal of Alloys and Compounds, 2009,468(1-2):58-63

21)Wang Jun , Liu Ying* Zhang Ping, et al. Effect of WC on the microstructure and mechanical properties in the Ti(C0.7N0.3)-xWC-Mo2C-(Co, Ni) system[J]. Journal of Refractory Metals & Hard Materials, 2009,27(1): 9-13

22)Yongzhong Jin, Ying Liu*,Yankun Wang, et al Synthesis of ultrafine (Ti,W,Mo,V)(C,N)–Ni composite powders by low-energy milling and subsequent carbothermal reduction–nitridation reaction[J].Journal of Alloys and Compounds, 2009,486(1-2):L34-L36.

23)Binghong Li, Ying Liu, Hui Cao, et al Rapid synthesis of TiB2/Fe composite in situ by spark plasma sintering[J]. Journal of Material Science, 2009,44(14):3909–3912.

24)Zhang R, Liu Y* Li J, et al. Effect of Ti&C substitution on the magnetic properties and microstructures of rapidly-quenched NdFeB alloy[J].Material Characterization, 2008,59(5):642-646

25)Yilong Ma, Ying Liu*, Jun Li, et al. Die-upset Nd11.5Fe72.4Co9Nb1B6.1 magnets with additions of Zn, Al and Sn [J] Journal of Magnetism and Magnetic Materials,2010,322(16):2419–2422.


College of Materials Science and Engineering
Sichuan University
No.24 South Section 1,Yihuan Road,Chengdu,Sichuan,P.R.China,610065
Tel:  +86-28-85416050      Fax:  +86-28-85416050